久久婷婷六月天婷婷,欧美日本日韩一区二区三区,黄色三级三级三级视频,国内精品丝袜福利视频

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Company dynamics

當(dāng)前位置:

首頁(yè) News Company dynamics

Causes of overflow during injection mold processing

Release time:2021-07-09


Overflow, also known as flash and overflow, usually occurs at the opening and closing position of the mold. For example, the parting surface of the mold, the gap of the insert and the hole of the ejector rod. If the overflow cannot be eliminated in time, it will lead to local collapse of the injection mold, and even permanent damage will be formed in serious cases. In addition, the overflow of insert gap and ejector pin hole will also lead to waste products stuck on the mold, affecting the demoulding process. So why does the injection mold overflow in the processing process? How to deal with the overflow phenomenon? The following editor will answer for you.

1、 Equipment

1. The improper installation and adjustment of the mold closing of the injection molding machine or the uneven elbow mechanism will cause the mold to not reach the due parallelism, presenting the phenomenon that one side of the mold is tightly closed and the other side is not tightly connected, which is easy to show overflow during the injection process.

2. There is a problem with the parallelism of the injection molding machine itself, and the uneven force distribution of the pull rod will also lead to the failure of the mold to close tightly and form a material overflow condition.

3. The injection molding machine has serious wear of the check ring, too much wear of the screw, lack of the set injection volume of the barrel, too small buffer pad and other conditions, which are likely to cause material overflow, so the operator must stop repairing or changing parts in time.

II. Mold

1. Poor accuracy of mold parting surface

The movable template (such as the middle plate) is deformed and warped, there are foreign objects on the parting surface, and there are prominent skid marks and burrs on the periphery of the mold frame. These conditions will lead to the overflow of the injection mold.

2. Unreasonable mold design

(1) If the opening position of the mold cavity is too biased, the mold will have excessive unilateral tension during the injection process, resulting in overflow.

(2) Polyethylene, polypropylene and other plastic materials have good mobility, and their viscosity in the molten state is low, so it is easy to enter the gap of the mold. Therefore, when manufacturing high-precision molds, operators should try to feed in the thick part of the mold, so as to avoid overflow and affect the integrity of the mold products.

(3) The poor matching accuracy of the sliding core of the mold or the offset between the fixed core and the cavity device will also lead to the appearance of the overflow condition.

(4) As for the multi cavity mold, the designer should pay attention to the reasonable design of the runner and gate, otherwise it will lead to uneven filling force and overflow.

3、 Process aspect

1. Under the action of high pressure and high speed, the tension of the mold will increase, causing overflow, so the operator needs to adjust the injection speed and injection time according to the thickness of the mold product. The filling of thin products should be high-speed and fast, while for thick products, low-speed filling should be used.

2. Some operators often choose to inject more molten material in order to avoid the depression of the injection mold, but doing so will certainly solve the problem, but it will lead to overflow. Therefore, when we encounter this situation, we should deal with it by extending the injection time or pressure holding time.

The above is about the analysis of the reasons for the overflow of injection mold. The editor mainly introduces the equipment, mold and process, and hopes to help you.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
91在线一区二区| 天堂久久久久久久久久久| 操我骚逼抽插视频| 澳门一区二区免费下线观看| 韩国年轻的母亲在线观看| 9国产亚洲精品国产| 校花内射国产麻豆欧美一区| 中文字幕乱码人妻一区二区三区| 妺妺坐在我腿上下面好湿| 日本熟妇一区二区三区四区| 东京热无码AV一区二区三区| 看看美日韩操逼吧| 色狠狠久久av北条麻妃| 一区二区三区四区五六区| 操逼动漫首页登录| 日韩 欧美 成人 免费| 韩国无玛黄片毛片| 多男用舌头伺候一女| 翘臀小穴在线观看| 熟女菊蕾老妇俱乐部视频| 精品一区二区av天堂色偷偷| 大鸡吧小骚逼视频| 性爱大鸡吧喷水视频| 露脸校花求大鸡巴插| 欧美大鸡巴捅骚逼吃| 久久亚洲精品中文字幕一| 精品久久久久中文字幕人| 在线看免费无码a片视频| 91成人精品国语自产拍| 激情亚洲人妻精品| 很黄很爽的免费视频大全| 女人的骚逼免费视频| 亚洲精品一区二区精华液| 我要操死你逼视频| 99久久国产综合精品女| 最新国产亚洲亚洲精品A| 男人天堂av在线免费看| 国产午夜福利视频第三区| 又爽又粗又大又长的爆草| 天天免费的无码AV| 西瓜在线看免费观看视频|